VanEck, Noise, & Palmtops...

Hi,

Palmtops are noisy, this is bad for Van Eck. Van Eck relies on the fact that
the device is emitting display signals significantly above the noise floor
or that there is a method to pull that signal out of the noise.

Considering the power draw of palmtops, while they are noisy they are also
very low power. My guestimate on emitted rf is in the micro-watt range. That
means for a succesful intercept the receiver would need to be in most
situation within feet of the device. It'd be much simpler to simply ask to
see the PDA because you were thinking of buying one than lugging all that
obvious equipment around...

If you want to defeat Van Eck you want either very quite or you want lots of
noise smoothly distributed across the rf spectrum.


    ____________________________________________________________________
   |                                                                    |
   |                   The obvious is sometimes false;                  |
   |                   The unexpected sometimes true.                   |
   |                                                                    |
   |                                       Anonymous                    |
   |                                                                    |
   |                                                                    | 
   |            _____                             The Armadillo Group   |
   |         ,::////;::-.                           Austin, Tx. USA     |
   |        /:'///// ``::>/|/                     http://www.ssz.com/   |
   |      .',  ||||    `/( e\                                           |
   |  -====~~mm-'`-```-mm --'-                         Jim Choate       |
   |                                                 ravage@ssz.com     |
   |                                                  512-451-7087      |
   |____________________________________________________________________|

At 11:49 AM -0800 2/10/98, Jim Choate wrote:
>If you want to defeat Van Eck you want either very quite or you want lots of
>noise smoothly distributed across the rf spectrum.

To defeat the integrating attacks you have described, you want to repeat
the same noise frame after frame.  It must be loud enough to swamp the
signal going to the display, so the output of the integration is the noise
and not the signal.


-------------------------------------------------------------------------
Bill Frantz       | Market research shows the  | Periwinkle -- Consulting
(408)356-8506     | average customer has one   | 16345 Englewood Ave.
frantz@netcom.com | teat and one testicle.     | Los Gatos, CA 95032, USA